![]() You can program up to sixteen additional keys for each vehicle using the PATS1 system.One already programmed and working key.Here is what you will need to add a duplicate Ford key for PATS1: repeat steps 1-7 for each additional key you would like to duplicate.It should go on for about 2 seconds which will indicate the new key has been successfully programmed. Insert the key you want to duplicate into the ignition cylinder and turn it to “ON” position. New Ford OEM Oval Logo Uncut Master Key Blank - MADE IN USA.Now you have five seconds to do the next step.Repeat step 2 with the second already programmed key.Remove the first original key from the ignition cylinder.Turn the ignition cylinder to “ON” position for one second and after to “OFF” position.insert your first original key – One of the two keys that currently you are able to start the car with into the ignition cylinder.Here are the steps you should take to program an additional Ford key: You can program up to eight additional keys for each vehicle using the PATS2-5 system.A cut key that you wish to program – make sure it has the right transponder value as your other key.Two already programmed and working keys.The more common models are PATS 2-5 and we will start with those keys first.įord transponder chip key – Inside look Here is what you will need to add a duplicate Ford key for PATS2-5: Once again, there is a difference between PATS1 system and PATS2-5. The process of making a duplicate key, when you already have two or more working keys is fairly easy and therefore we recommend doing so. What is the procedure of programming an extra duplicate key? I already have a working key, I just want to make a duplicate. We highly recommend making a copy of the key. Keep in mind, ALL other keys will not work anymore. Once the security light goes off after the 3 rd time (total 45 minutes) the new key should be programmed and start the car.The security light on the dash should flash for an additional 15 minutes and then go off. Within three minutes, turn the ignition cylinder into “OFF” position and then back to “ON” again.The security light on the dash should flash for an additional fifteen minutes and then go off. After the first 15 minutes, the security light will stop flashing, within three minutes, you should turn the ignition cylinder into “OFF” position and then back to “ON” again.We suggest you have a stopwatch as well because the next step will have to happen within three minutes and you don’t want to miss that. Once the security light flashes, it will stay on for fifteen minutes.If the security light doesn’t illuminate it means you have a problem with your battery and you should charge or replace it. Make sure you look at the dash as the security/theft light should flash as you turn the key. Insert the new cut and unprogrammed key you have into the ignition cylinder and turn it to the “ON” position.Program Ford Keys – Procedure and Type Of Keys ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |